What is the operation process of the PMC monitoring system?

Closed-Circuit Television Monitoring System 24-hour normal operation. During normal operation, the closed-circuit television monitoring system runs fully automatically without manual intervention, and its operation is monitored by security personnel on duty at the control center. Security personnel at the PMC monitoring system control center can operate the closed-circuit television monitoring system according to actual conditions. When equipment malfunctions occur, the on-duty security guard needs to report for repair promptly. So, what is the PMC monitoring system operation procedure?

What is the PMC monitoring system operation procedure?

1. The on-duty security guard at the PMC monitoring system control center should be familiar with the closed-circuit television monitoring system equipment within their jurisdiction and handle its allocation. Equipment operation must strictly follow the operating procedures and maintain the equipment in good condition.

2. Security personnel on duty at the control center must not arbitrarily modify PMC monitoring system parameter settings without consent from the superior equipment department. During inspections, viewers are prohibited from operating related equipment or using on-site photos. Photography and video equipment must not download or transmit information and data related to hard disk recordings; permission is required. If video clipping is needed, approval from relevant leadership must be obtained.

3. Authorities can conduct direct inspections after presenting valid identification but must register the inspector's ID and report through the proper channels step by step.

4. The company and relevant leaders at the control center bear direct responsibility for video playback viewed during work inspections; however, all requirements for viewing operations must be followed.

5. If authorities need to borrow video evidence, approval from the department head is required; abnormal operation status forms apply.

6. At the same time, increase patrols in this area.

What are the PMC monitoring system precautions during thunderstorm weather?

1. Prepare for lightning protection before thunder, notify superiors and customer service to shut down the video system host, and reasonably arrange personnel attendance in major areas.

2. During thunderstorm weather, first shut down the PMC monitoring system operation computer, hard disk video host, and transmission equipment, and back up the display. When all equipment is completely turned off, pull down the main power switch and unplug all devices to prevent lightning from passing through cables.

3. Pull down the main power switch of the front camera to prevent lightning strikes through cables.

What is the PMC monitoring system troubleshooting procedure?

1. Monitor image is unclear. Adjust the contrast and brightness knobs on the monitor.

2. Check if the video cable is loose.

3. Check whether the video signal of the video distributor is normal.

4. Clean the dust cover and lens dust of the PMC monitoring system; adjust the focus of the entire lens.

5. Check if the camera or lens is damaged.

6. Check whether the camera's power supply is normal.

Why is there no image on the PMC monitoring system monitor?

1. Check whether the monitor is powered on or damaged.

2. Check if the video cable is loose.

3. Check whether the video switcher is powered on or damaged.

4. Check whether the camera is powered or damaged.